Measurement equipment for the mining
THE INSTRUMENT ALLOWS TO FIND THE EXACT POSITION OF THE NON-INTERSECTING HOLES (fig.1)
Through the fitting of the probes into the non intersecting holes (fig.2), the instrument shows:
-
if the holes are long enough or are short;
-
if the hole is on the left or on right as to the other;
-
the minimum distance between a hole and the other.
So, it is sufficient to move the drill parallel to the hole for the distance which appears on the instrument and to effect a new hole, knowing, this time, the exact position (fig.3).
.
The instrument is complete of:
-
Electronic machinery containing the electronic circuit, with display showing the distance;
-
One electronic battery charger 220 Volt and 50 Hz;
-
Cable with receiving probe, 35 mm. diameter;
-
Cable with transmitting probe, 14 mm. diameter;
-
Stainless steel adapter for transmitting probe, to be used for wide diameters holes;
-
Nos. 20 aluminium coupling poles of 2 m. per piece, to introduce the probes in the no-intersecting holes.
Technical data:
-
Maximum measurable distance: 120 cm
-
Receiving probe diameter: 35 mm
-
Transmitting small probe diameter: 14 mm
-
Maximum measurable distance left-right: 140 cm
-
Length of cable of the receiving probe: 50 mt
-
Length of cable of the transmitting small probe: 100 mt
-
Working temperature: from –10 to +40 c°
-
Self feeding by rechargeable battery
(The manufacturer reserves the right to mo the tool and its features without notice.)
Misuratore elettronico da cava, impiegato nella ricerca dei fori, per il taglio con il filo diamantato
![]() |
Lo strumento consente di trovare l'esatta posizione dei fori non Mediante l'inserimento delle sonde nei fori non comunicanti, lo
Sarà quindi sufficiente spostare parallelamente il perforatore della |
![]() |
![]() |
![]() |
![]() |
Lo strumento è composto da:
- Valigia a tenuta stagna, con batteria ricaricabile e display 7'' digitale interattiva- Carica batterie elettronico 100-230 Volt e 50-60 Hz;
- Avvolgi cavo con sonda ricevente da 42 mm e 50 mt. di cavo;
- Avvolgi cavo con sonda trasmittente da 14 mm e 100 mt. di cavo di cui 10mt. di tubo semirigido;
- Adattatore in acciaio inox per sonda trasmittente da 14 mm., per fori di grande diametro;
- Nr. 20 prolunghe estensibili in alluminio lungh. 2mt. c.u., per l’introduzione delle sonde nei fori non comunicanti.
Caratteristiche CERCA FORI 2.0 rispetto alla versione precedente MG78:
Cerca Fori 2.0 |
Cerca Fori MG78 |
|
Distanza massima misurabile |
200 cm. (precisione al centimetro) |
120 cm. |
|
200 cm. |
140 cm. |
Rilevamento misurazione |
avanti/indietro destra/sinistra sopra/sotto |
avanti/indietro destra/sinistra |
Display |
7' digitale interattivo |
solo indicatore distanza |
Modalità di utilizzo |
interattiva, esperta o guidata |
manuale |
Valigia contenente il circuito elettronico |
design rinnovato, antiurto, a tenuta stagna |
alluminio |
Carica Batterie |
elettronico 100-230 Volt e 50-60 Hz |
220V, 50 Hz. |
Sonda ricevente* |
diam. 42mm. con 50mt. cavo |
diam. 35mm. con 50mt. cavo |
Sonda Trasmittente* |
diam. 14mm. con 100mt. cavo |
diam. 14mm. con 100mt. cavo |
Alimentazione |
1 batteria ricaricabile |
3 batterie ricaricabili |
Istruzioni d'uso |
digitali interattive multilingua (ita, eng, esp) |
standard |
Personalizzazione preimpostata per rivendita |
Menù di avvio e menù Help |
nessuna |
Temperatura di utilizzo |
da -10 a +40 C° |
da -10 a +40 C° |
*Le sonde ricevente e trasmittente MG78 sono compatibili con la versione nuova 2.0, ma non leggono le tre dimensioni,
bensì soltanto la misurazione destra/sinistra, avanti/indietro.
(Il costruttore si riserva il diritto di modificare lo strumento e le sue caratteristiche senza preavviso.)
Natural Stone Heaters
The radiator stone Termopietra ® was created with the aim of creating a system of environmentally friendly heating, to achieve a balance between maximum energy efficiency and unique design.
The natural radiant heat creates a cozy atmosphere in a comfortable and healthy environment, natural stone gives originality and elegance, each piece is unique and inimitable.
The same principle can be applied for the realization of furnishings, suitable for any type of project interior architecture.
Electronic quarry equipment to find the holes for cutting with diamond wire
![]() |
The instrument allows to find the exact position of the Through the fitting of the probes into the non intersecting holes,
So, it is necessary to move the drill parallel to the hole for the distance |
![]() |
![]() |
|
![]() |
![]() |
![]() |
The instrument is complete of:
-
Watertight, digital, interactive, rechargeable suitcase with 7'' display;
-
Electronic battery charger 100-230 Volt e 50-60 Hz;
-
Big probe 42mm. diam with 50mt. cable and reel (receiver);
-
Small probe 14mm. diam with 100mt. cable and reel (transmitter);
-
Stainless steel adapter for big holes (for transmitter);
-
Nos. 20 aluminium extendable bars 2mt. e.o., to introduce the probes in the no-intersecting holes.
The main improved features of CERCA FORI 2.0, compared to Hole Finder MG78:
Cerca Fori 2.0 |
Hole Finder MG78 |
|
Maximum measurable distance |
200 cmt. (with centimetre precision) |
120 cmt. |
Maximum measurable distance left-right |
200 cmt. |
140 cmt. |
Measurement detection |
back/forth left/right above/under |
Forward/backward left/right |
Display |
7' digital interactive |
distance indicator only |
Method of use |
interactive, expert or guided use |
manual |
Suitcase containing the electronic circuit |
renewed design, shockproof, watertight |
aluminium |
Battery Charger |
electronic 100-230 Volt and 50-60 Hz |
220V, 50 Hz |
Receiving probe* |
diam. 42mm. with 50mt. cable |
diam. 35mm. with 50mt. cable |
Transmitting probe* |
diam. 14mm. with 100mt. cable |
diam. 14mm. with 100mt. cable |
Supply |
1 rechargeable battery |
3 rechargeable batteries |
User manual |
multi-language interactive digital (ita, eng, esp) |
standard |
Customization preset for resale |
Start menu and Help menu |
none |
Working temperature |
from -10 to +40 C° |
from -10 to +40 C° |
*The transmitting and receiving probes MG78 are compatible with the new version 2.0, though don't read the 3 dimensions,
but only the 2 measurements left/right and back/forth.
(The manufacturer reserves the right to modify the instrument and its features without prior notice.)