Measurement equipment for the mining
THE INSTRUMENT ALLOWS TO FIND THE EXACT POSITION OF THE NON-INTERSECTING HOLES (fig.1)
Through the fitting of the probes into the non intersecting holes (fig.2), the instrument shows:
if the holes are long enough or are short;
if the hole is on the left or on right as to the other;
the minimum distance between a hole and the other.
So, it is sufficient to move the drill parallel to the hole for the distance which appears on the instrument and to effect a new hole, knowing, this time, the exact position (fig.3).
The instrument is complete of:
Electronic machinery containing the electronic circuit, with display showing the distance;
One electronic battery charger 220 Volt and 50 Hz;
Cable with receiving probe, 35 mm. diameter;
Cable with transmitting probe, 14 mm. diameter;
Stainless steel adapter for transmitting probe, to be used for wide diameters holes;
Nos. 20 aluminium coupling poles of 2 m. per piece, to introduce the probes in the no-intersecting holes.
Maximum measurable distance: 120 cm
Receiving probe diameter: 35 mm
Transmitting small probe diameter: 14 mm
Maximum measurable distance left-right: 140 cm
Length of cable of the receiving probe: 50 mt
Length of cable of the transmitting small probe: 100 mt
Working temperature: from –10 to +40 c°
Self feeding by rechargeable battery
(The manufacturer reserves the right to mo the tool and its features without notice.)